Need help to fix Dashboard and Driver Model in NFSHS

[BoxCarRacer]

Hey guys I was wondering if someone could help me with the following:

1. I need to fix the Dash on Ryuji's Italdesign Scighera. Everyting is working the thing is that the tachometer (the moving arrow that marks the speed on the dashboard) as well as the lights when driving at night are not alligned.
2. I noticed that for the Official EA Ford Falcon, if you upgrade that car to the 3rd set the seat moves as well as the hands, when you steer, when only the hands should move.
3. For Ryuji's Spectre R42, do you guys know if it is posible to replace the helmet for the stock face of the driver?

I'm sorry if I'm asking this out all of a sudden. I'm trying to complete my own version of highstakes by incorporating the cars that where on NFSIII that didn't make it to NFSHS. If anyone would like I can share all the files I have. Any help would be appreciated.

P.S. By the way to add damage to a car what can you do.

[DrSpeed]

To fix the steering on the Ford, export CAR3.FCE and open it with FCE Converter. Click on Driver movements and then Reset all. Then click and drag a box over the steering wheel and the hands so these dots are green and the rest red. Then simply save it and import it back to the viv file.

You can switch heads with FCE Finish. Export a head from any car and import it to the Spectre. Bear in mind, you probably have to change the texture mapping so it doesn't look messed up. The program also has a tendency to crash while doing this, if you're not careful.

I usually use ZModeler to add damage to cars.

Hope this was helpful.

[BoxCarRacer]

Thank's Dr.Speed!

I managed to correct the ford XR8 and import the head for the Spectre from another car. For this last one what can I do for the texture mapping of the driver's head, since I have a face without textures right now.

Also I have yet to try ZModeler for the damage in the Countach.

Thanks on advance.

Regards.

[DrSpeed]

Open the fce in FCE Finish and press F10 to get to the textures tab. Select the surfaces you want to correct and press Edit. Start with the skin and move it to the beige area in the texture (if there is one). Deselect with right mouse or press the most right button in Selection (the one with 8 white triangles, forming a square) and repeat with another part of the head, like the hair or the sunglasses.

[BoxCarRacer]

Hi,

Thanks for your help DrSpeed. I haven't been able to try it since I've been so busy at work. I'm gonna do some tests about it tomorrow.

By the way, do you know where you can add the subject on a new post. I can't find it and can't make a new post regarding some files I'm looking for.

Thanks in advance.

[WiLL]

Hi box car racer,I think the Staff made changes,few weeks ago. That no one,can Edit the Subject line,even on a edit,your own post? So maybe that's the Cause of your problem, on here to,I'm.on mobile only, but it still works.
Its above there some place,subject line. Only on a new post is all I'm thinking... 

[BoxCarRacer]

I think the Staff made changes,few weeks ago.

I think that figures.  I've even tried using Explorer 11, Firefox and Chrome and I'm still unable to do so. I'm using edge by the way.

[BoxCarRacer]

Hi box car racer,I think the Staff made changes,few weeks ago. That no one,can Edit the Subject line,even on a edit,your own post? So maybe that's the Cause of your problem, on here to,I'm.on mobile only, but it still works.
Its above there some place,subject line. Only on a new post is all I'm thinking... 

Thanks Will I managed to make a new Post Today. Weird Stuff. 

Dr. Speed I managed to change the heads, but I'm having a little bit of trouble with the texturing process. I'll keep making some tests, if I need more guidance. I will let you know.

[BoxCarRacer]

Ok. I managed to add textures to the head.

However I now have the following problems.

For the SpectreR42:
Everything is done. The only thing I have to try is coloring the driver's Head.

For the Scigera:

1. When I tried to map the neck of the driver to a texture it gets fixed. However when I save and check it out the rearview mirror has some strange texture coloring I think it has to be the chrome option in the Texture editor.
2. When I tried to realign the odometer my whole dash board view experiences an offset as well.

I think the hardest challenge will be the Scigera.

Do you think you can give me a hand with these one?

What do you recommend.

ZModeler for the Countach is still pending.

Regards,